REMOVAL AND INSTALLATION



Pre-removal and post-installation operation
  • Splash shield front removal and installation (Refer to .)
  • Front bumper side bracket removal and installation (Refer to GROUP 51 - Front Bumper Assembly .)
  • Headlamp assembly removal and installation (Refer to GROUP 54A - Headlamp .)
  • Front deck garnish removal and installation (Refer to GROUP 51 - Windshield Wiper .)
  • Side air dam removal and installation (Refer to GROUP 51 - Side Air Dams .)





Removal steps
<<A>>
>>B<<
1.
Side turn-signal lamp


2.
Bolt


3.
Fender assembly


4.
Bolt


5.
Fender


6.
Plain nut

>>A<<
7.
Sealant

REMOVAL SERVICE POINTS



<<A>> SIDE TURN SIGNAL LAMP REMOVAL



Insert the Ornament Remover (special tool: MB990784) as shown to compress the hook and disengage the claw. Then remove the side turn signal lamp.

INSTALLATION SERVICE POINTS



>>A<< SEALANT INSTALLATION


1.
caution Before the next job, leave the decreased parts for 3 minutes or more to dry. Do not touch the degreased parts.
Use a parts cleaner (MZ100387 or equivalent) to degrease the fender around the sealant installation position and the body flanges.
2.Bend the sealant to the half length.

3.Install the sealant to the specified position on the body flange.

>>B<< SIDE TURN SIGNAL LAMP INSTALLATION



First, engage the claw in the fender, and then engage the hook to install the side turn signal lamp.