REMOVAL AND INSTALLATION






·
Washer tank (Refer to )


·
Washer motor (Refer to



Rear washer nozzle removal steps


·
High-mounted stop lamp assembly (Refer to )


1.
Rear washer nozzle assembly



Rear wiper blade removal steps


2.
Rear wiper blade assembly

>>A<<
3.
Rear wiper blade



Rear wiper motor removal steps

>>B<<
4.
Rear wiper arm assembly


5.
Rear wiper shaft cover


6.
Grommet A

>>C<<
7.
Grommet B


·
Tailgate trim (Refer to GROUP 52A, Tailgate Trim )


8.
Rear wiper motor cover


9.
Rear wiper motor assembly



Rear washer hose removal steps


·
Front pillar trim (Refer to GROUP 52A - Interior Trim .)


·
Headlining assembly (Refer to GROUP 52A - Headlining .


10.
Rear washer hose
note For removal and installation of the wiper and washer switch, refer to GROUP 54A, Column Switch .

INSTALLATION SERVICE POINTS



>>A<< REAR WIPER BLADE INSTALLATION



caution Use a curved backing like that shown for the backing of a wiper blade to ensure sustained wiper wiping performance.

>>B<< REAR WIPER ARM AND BLADE ASSEMBLY INSTALLATION



Assemble the wiper blade so that their edge stops at the specified position.
Standard value (A): 0±5 mm from the defogger heater element line

>>C<< GROMMET B INSTALLATION



caution Install the grommet B with its triangle mark facing upward.