|
Check Conditions
- 3 seconds elapse after the electric motor switch is turned ON, or 3 seconds elapse
after the main battery starts to be charged.
- None of the following diagnosis codes occur at the same time.
- P1AA8: Local CAN (for main battery) signal time-out
- U1082: Local CAN (for main battery) bus off
|
|
Judgement Criterion
- The module temperature is less than -30°C or more than 60°C.
|
|
- The module (battery cell, CMU and module temperature sensor)
in the main battery is failed.
|
|
- Check the data list reference table corresponding to
the diagnosis code (Refer to ).
|
|
OK: At ambient temperature (atmospheric temperature) or equivalent (when the vehicle
driving and the charge are not performed for a long time)
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection
Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|
|
Replace the main battery.
|
|
|