REAR WIPER AND WASHER

• Fixed interval type intermittent wiper* has been adopted to provide a clear rear view in rainy weather.
  
• The reverse linked operation function has been adopted with which the rear wiper operates for approximately 3 seconds when the selector lever is shifted to the reverse (R) position.
  
• The washer nozzle is established in the high-mount stop lamp.
  
• The washer tank is shared with the windshield washer.
  

note	*: Using the customisation function, the fixed interval type intermittent wiper function can be adjusted. (Refer to .)

DESCRIPTION OF CONSTRUCTION AND OPERATION

REAR WIPER CONTROL <INITIAL SETTING: 8 SECONDS, WITHOUT CONTINUOUS OPERATION>

1. When the rear wiper switch on the column switch is turned ON while the electric motor switch is in ACC or ON position, ETACS turns the rear wiper drive signal ON for 3 seconds (for approximately 2 wiper cycles) and operates the intermittent action in approximately 8-second interval.
   When the selector lever is shifted to R (reverse) position during the rear wiper operation, the inhibitor switch R (reverse) turns ON, and one second after that, ETACS turns the rear wiper drive signal ON for 3 seconds (for approximately 2 wiper cycles), and operates the intermittent action in approximately 8-second interval again.
   
2. By the special operation of the rear wiper switch on the column switch (2 consecutive operations), the rear wiper can operate continuously regardless of the set intermittent time.
   

note	The rear wiper intermittent duration can be adjusted by the customisation function. (Refer to .)

REAR WIPER LINKED WITH WASHER FUNCTION