DISASSEMBLY AND REASSEMBLY







Disassembly steps
<<A>>
>>B<<
1.
Bearing

>>A<<
2.
Dust cover


3.
Inner shaft

DISASSEMBLY SERVICE POINT



<<A>> BEARING REMOVAL



1.Bend the outside periphery of dust cover inward with a wooden hammer.

2.After special tool bearing remover (MB990560) has been installed as shown, tighten the nut of the special tool until the portion of the special tool touches the bearing outer race.

3.Press out the inner shaft from the bearing.

REASSEMBLY SERVICE POINTS



>>A<< DUST COVER INSTALLATION



Using a steel pipe, install a new dust cover onto the inner shaft.
Steel pipe
mm
Overall length
50
Outside diameter
75
Wall thickness
4

>>B<< BEARING INSTALLATION



Use special tool bearing remover (MB990560) to press-fit the bearing onto the inner shaft.