|
If the window glass automatically starts moving downwards at the wrong time while it is
being raised, carry out the following adjustment or replacement procedures:
|
|
1.Remove the cab rear end lower trim (Refer to GROUP 52A, Interior trim ).
|
|
2.Remove the waterproof film (Refer to ).
|
|
3.Remove the window regulator assembly from the rear slide window glass, and then raise
and lower the rear slide window glass by hand to check the operation force.
note |
Insert a cushion or similar object to prevent damage to the glass if it should happen
to fall down.
|
|
|
4.If the rear slide window glass does not move up and down smoothly, check or repair the
following points:
- Check the installation condition of the runchannel.
- Check the installation condition of the rear slide window sash
side and the rear slide window sash upper.
5.If a repair or an adjustment does not make sense, replace the rear slide window sash
side and the rear slide window sash upper.
|