SUPPORT LOCATIONS FOR LIFTING AND JACKING



SUPPORT POSITIONS FOR A GARAGE JACK


caution Be sure to support the specified locations only. Otherwise, deformation of vehicle may occur.



SUPPORT POSITIONS FOR RIGID RACKS AND SINGLE-POST LIFT OR DOUBLE-POST LIFT


caution
  • If rubber attachments with grooves that are too thick are used at the front support positions, the front fender may become bent, so be sure to use rubber attachments with groove thicknesses of 18 mm or less.

  • If attachments which are not high enough are used, they may damage areas such as the side step. Be sure to use attachments which are high enough, or remove the side step if not using attachments.



SUPPORT POSITIONS FOR PLATE TYPE LIFT


caution Insert a spacer between the notch and the lift to avoid damage to the side sill garnish. Be careful not to contact the spacer against the side sill.