Tool
|
Number
|
Name
|
Use
|

|
MB991955
a: MB991824 b: MB991827 c: MB991910 d: MB991911 e: MB991825 f: MB991826
|
M.U.T.-III sub assembly
a: Vehicle communication interface (V. C. I.) b: M.U.T.-III USB cable c: M.U.T.-III main harness A (Vehicles with CAN communication system) d: M.U.T.-III main harness B (Vehicles without CAN communication system) e: M.U.T.-III adapter harness f: M.U.T.-III trigger harness
|
| caution |
For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B or C instead, the CAN communication does not function correctly.
|
- Reading diagnosis codes.
- Actuator test.
|

|
MB991223
a: MB991219 b: MB991220 c: MB991221 d: MB991222
|
Harness set
a: Test harness b: LED harness c: LED harness adaptor d: Probe
|
Checking the continuity and measuring the voltage at the harness connector.
|

|
MB992006
|
Extra fine probe
|
Continuity check and voltage measurement at harness wire or connector for loose, corroded or damaged terminals, or terminals pushed back in the connector.
|

|
MB992190
|
Radiator cap tester adapter set
a: Radiator cap tester adapter b: Coolant leak test adapter
|
- Engine coolant leak check <BWC>.
- Radiator condenser tank cap valve opening pressure check <BWC>.
|

|
MB992193
|
Radiator cap tester
a: Radiator cap tester b: Adapter
|

|
MB991871
|
LLC changer
|
Coolant refilling.
|

|
MB992042
|
Water temp sensor wrench
|
Engine coolant temperature sensor removal and installation <4B10, 4B11-Turbo>
|