|
1.Remove the engine room under cover front B assembly. (Refer to GROUP 51 - Under cover .)
|
|
2.Remove the oil drain plug and gasket to drain the oil. 3.Install the oil drain plug and new gasket, then tighten them to the specified torque. Tightening torque: 32 ± 2 N·m
|
|
4.Remove the oil filler plug and gasket, then fill the oil up to the lower edge of the oil filler plug hole.
Brand name: Dia Queen LSD Gear Oil Quantity: 0.8 L
5.Install the oil filler plug and new gasket, then tighten them to the specified torque. Tightening torque: 32 ± 2 N·m 6.Install the engine room under cover front B assembly. (Refer to GROUP 51 - Under cover .)
|