Inspection Procedure 12: Does not shift properly (some points)
COMMENTS ON TROUBLE SYMPTOM
PROBABLE CAUSES
- Malfunction of valve body
- Malfunction of the A/T-ECU
DIAGNOSIS PROCEDURE |
STEP 1. Check when the shift points early or late. |
Q.
Are the shift points early or late only when A/T fluid is -20°C or less, or 125°C or more?
|
The symptom is due to characteristics of the INVECS-II system, but is not abnormal. |
|
Go to Step 2. |
|
STEP 2. M.U.T.-III actuator test |
(1)Item 33: INVECS-II cancel command |
(2)Test drive the vehicle (Refer to Road Test, Inspection procedure 8 ). |
(3)Check that the gear shifting corresponds to the standard shift line of the shift pattern diagram. |
Q.
Is the check result normal?
|
The inspection is complete. |
|
Replace the A/T-ECU. |
|