DISASSEMBLY AND REASSEMBLY

			Disassembly steps
		1.	Solenoid valve support
<<A>>	>>C<<	2.	Underdrive solenoid valve
<<A>>	>>C<<	3.	Second solenoid valve
<<A>>	>>C<<	4.	Damper clutch control solenoid valve
<<A>>	>>C<<	5.	Overdrive solenoid valve
<<A>>	>>C<<	6.	Low-reverse solenoid valve
		7.	Manual valve
		8.	Cover
		9.	Plate (separating plate outside)
		10.	Outside valve body assembly
	>>B<<	11.	Steel ball (orifice check ball)
	>>B<<	12.	Spring
		13.	Plate (separating plate inside)
	>>A<<	14.	Damping valve
	>>A<<	15.	Damping valve spring
	>>A<<	16.	Steel ball (line relief)
	>>A<<	17.	Spring
	>>A<<	18.	Steel ball (orifice check ball)
	>>A<<	19.	Spring
		20.	Inside valve body assembly

			Disassembly steps
		21.	Roller
		22.	Damper clutch control valve sleeve
		23.	Damper clutch control valve
		24.	Damper clutch control valve spring
		25.	Plate
		26.	Screw
		27.	Regulator valve spring
		28.	Regulator valve
		29.	Plate
		30.	Fail-safe valve A sleeve
		31.	Fail-safe valve A2
		32.	Fail-safe valve A spring
		33.	Fail-safe valve A1
		34.	Plate
		35.	Plug
		36.	Torque converter valve
		37.	Torque converter valve spring
		38.	Plate
		39.	Fail-safe valve B sleeve
		40.	Fail-safe valve B
		41.	Inside valve body
		42.	Roller
		43.	Overdrive pressure control valve sleeve
		44.	Overdrive pressure control valve
		45.	Overdrive pressure control valve spring
		46.	Roller
		47.	Low-reverse pressure control valve sleeve
		48.	Low-reverse pressure control valve
		49.	Low-reverse pressure control valve spring
		50.	Plate
		51.	Plug
		52.	Switch valve
		53.	Roller
		54.	Underdrive pressure control valve sleeve
		55.	Underdrive pressure control valve
		56.	Underdrive pressure control valve spring
		57.	Roller
		58.	Second pressure control valve sleeve
		59.	Second pressure control valve
		60.	Second pressure control valve spring
		61.	Outside valve body

DISASSEMBLY SERVICE POINT

Mark each solenoid valve with white paint to identify its location.

Install the springs, steel balls, damping valve, and damping valve spring into the locations indicated in the drawing.

Install the springs and steel balls into the locations indicated in the drawing.

Install the solenoid valves according to the markings that have been made during disassembly.

No.	Solenoid valve
1	Underdrive solenoid valve
2	Second solenoid valve
3	Damper clutch control solenoid valve
4	Overdrive solenoid valve
5	Low-reverse solenoid valve