|
1.Park the vehicle on a level surface with tyres and steering wheel positioned in a
straight ahead direction.
|
|
2.
caution |
Before connecting or disconnecting M.U.T.-III, always
turn the ignition switch to the LOCK (OFF) position.
|
Before setting M.U.T.-III, turn the ignition key to the LOCK (OFF) position.
|
|
4.Select "Steering angle sensor."
|
|
5.Select "Special function."
|
|
6.Select "SAS calibration."
|
|
7.Select and run "SAS Initialization." (Reusable parts only)
note |
- Since the neutral position stored in the steering wheel sensor is no longer available,
"SAS Initialization." is displayed.
- Since a new steering wheel sensor has no neutral position, "SAS calibration" is
displayed.
|
|
|
8.Select and run "SAS calibration."
|
|
9.Exit "Steering angle sensor" menu, and then select "ABS/ASC/ASTC/WSS."
|
|
10.Select "Special function."
|
|
11.Select "Learn neutral position of steering angle sensor."
|
|
12.Select and run "Steering wheel sensor calibration."
|
|
13.Check whether the ASC-ECU-related diagnosis code is set.
|
|
14.Erase the diagnosis code.
note |
- Erase the diagnosis code C121A.
- Erase the diagnosis code U1428, when it occrs from the ACD.
|
|
|
15.Before removing M.U.T.-III from the vehicle, turn the ignition key to the LOCK (OFF)
position.
|