SPECIAL TOOLS


Tool
 Number
 Name
 Use



    MB992080
    a: MB992081
    b: MB992082
    Belt tension meter set
    a: Belt tension meter
    b: Microphone assembly

 Alternator and others belt tension check


MB991955

    a: MB991824
    b: MB991827
    c: MB991910
    d: MB991911
    e: MB991825
    f: MB991826
 M.U.T.-III sub assembly

    a: Vehicle communication interface (V. C. I.)
    b: M.U.T.-III USB cable
    c: M.U.T.-III main harness A (Vehicles with CAN communication system)
    d: M.U.T.-III main harness B (Vehicles without CAN communication system)
    e: M.U.T.-III adapter harness
    f: M.U.T.-III trigger harness
caution For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.

  • Checking the ignition timing
  • Checking the idle speed


MB990767
 Front hub and flange yoke holder
 Holding the crankshaft pulley


MD998719
 Pin


MB992103
 Chain tension release bar
 Camshaft and camshaft sprocket assembly (exhaust side) removal


MD998772
 Valve spring compressor
 Valve spring compression


MB992090
 Retainer holder attachment


MB992089
 Retainer holder C


MB992085
 Valve stem seal pliers
 Valve stem seal removal


MD998737
 Valve stem seal installer
 Valve stem seal press-fitting


MD998727
 Oil pan FIPG cutter
 Engine oil pan removal


MB991883
 Flywheel stopper
 Supporting the flywheel <M/T> or drive plate <CVT>


MD998718
 Crankshaft rear oil seal installer
 Press-fitting the crankshaft rear oil seal


MB991448
 Bush remover and installer base
 Press-fitting the crankshaft front oil seal


MB991614
 Angle gauge
 Balancer shaft and oil pump module bolt installation


MB991454
 Engine hanger balancer
 Support of engine assembly
note
  • For the engine hanger balancer (MB991454), use a chain only.
  • Engine hanger balancer (MB991454) is a part of the engine hanger assembly (MB991453).


MB991527
 Hanger


MB991928

    a: MB991929
    b: MB991930
    c: MB991931
    d: MB991932
    e: MB991933
    f: MB991934
 Engine hanger

    a: Joint (50) × 2
    b: Joint (90) × 2
    c: Joint (140) × 2
    d: Foot (standard) × 4
    e: Foot (short) × 2
    f: Chain and hook assembly


MB991895
 Engine hanger


MB991956
 Engine hanger plate