![](/outlander-2008/img/11/AK600860AB00ENG.png)
|
1.After temporarily tightening the rear air intake plenum stay with the installation bolts,
check that the inlet manifold fastens securely to the cylinder head. 2.Tighten the rear air intake plenum stay to the specified torque. Tightening torque: 20 ±
5 N·m
|
![](/outlander-2008/img/11/AK600859AB00ENG.png)
|
1.After temporarily tightening the front manifold plenum stay with the installation bolts,
check that the inlet manifold fastens securely to the cylinder head. 2.Tighten the front manifold plenum stay to the specified torque. Tightening torque: 20 ±
5 N·m
|
![](/outlander-2008/img/11/AK600861AB00ENG.png)
|
1.After temporarily tightening the throttle body stay with the installation bolts, check
that the throttle body fastens securely to the cylinder head. 2.Tighten the throttle body stay to the specified torque. Tightening torque: 20 ±
5 N·m
|
![](/outlander-2008/img/11/AK600853AB00ENG.png)
|
Install the EGR pipe gasket so that the tab is positioned as shown in the illustration.
|