REMOVAL AND INSTALLATION <4HN>



REMOVAL



Drain: Engine cooling system.
Remove:

  • The ancillary drive belt
  • The timing belt

Remove:

  • The 7 bolts (1)
  • The coolant pump (2)
caution Clean the joint face with the approved removal product.
Do not use a cutting or abrasive tool.

INSTALLATION



Fit:

  • The coolant pump (2)
  • The 7 bolts (1)
Tighten the 7 bolts (1) to 1.5 ± 0.3 daN·m.
Fit:

  • The timing belt
  • Ancillary drive belt.
Fill and bleed the cooling system (Engine).