REMOVAL AND INSTALLATION <4B1>



Pre-removal Operation
  • Air Cleaner Assembly Removal (Refer to GROUP 15 - Air Cleaner ).
  • Battery and Battery Tray Removal (Refer to GROUP 54A - Battery ).

Post-installation Operation
  • Battery and Battery Tray Installation (Refer to GROUP 54A - Battery ).
  • Air Cleaner Assembly Installation (Refer to GROUP 15 - Air Cleaner ).
  • Clutch Fluid Supplying
  • Clutch Bleeding (Refer to ).
  • Clutch Pedal Check (Refer to ).





Clutch line removal steps


1.
Hose clip A
<<A>>
>>A<<
2.
Clutch tube assembly A


3.
Hose clip B
<<A>>
>>A<<
4.
Clutch tube assembly B



Concentric slave cylinder adapter removal steps


·
Transmission assembly (Refer to GROUP 22A, Transmission assembly ).
<<A>>
>>A<<
5.
Concentric slave cylinder adapter

REMOVAL SERVICE POINT



<<A>> CLUTCH TUBE ASSEMBLY CONNECTION/CONCENTRIC SLAVE CYLINDER ADAPTER REMOVAL




caution
  • Do not remove the O-rings and the clips from the clutch tube assembly, the concentric slave cylinder adapter and the concentric slave cylinder.
  • If the O-rings or the clips of the clutch tube assembly, the concentric slave cylinder adapter and the concentric slave cylinder are damaged, replace each assembly.

INSATALLATION SERVICE POINT



>>A<< CONCENTRIC SLAVE CYLINDER ADAPTER/CLUTCH TUBE ASSEMBLY CONNECTION INSTALLATION




caution
  • Check that the O-rings and the clips are not damaged before installing the clutch tube, the concentric slave cylinder adapter and the concentric slave cylinder.
  • If the O-rings of the clutch tube, the concentric slave cylinder adapter and the concentric slave cylinder and their installation positions are contaminated, clean with the clutch fluid before installation.