|
1.After operating the paddle shift levers (+ side, - side) by pulling them to the rearward of the vehicle, check that the levers are returned to the original positions quickly when released. Also, check that no looseness, friction or abnormal sound occurs.
2.Remove the paddle shift assembly. (Refer to GROUP 37 - Steering shaft  .)
|
|
3.Check for continuity between the paddle shift switch connector terminals.
Standard value:
|
|
Paddle shift lever
|
Terminal number
|
Resistance value
|
Upshift and hold the lever.
|
1 - 2
|
Continuity exists. (2 Ω or less)
|
Downshift and hold the lever.
|
2 - 3
|
No operation
|
No continuity between the terminals
|
|
4.In the cases other than the above, replace the paddle shift assembly.
|