SPECIAL TOOL


Tool
 Number
 Name
 Use


MB991955

    A: MB991824
    B: MB991827
    C: MB991910
    D: MB991911
    E: MB991825
    F: MB991826
 M.U.T.-III sub-assembly

    A: Vehicle communication interface (V.C.I.)
    B: USB cable
    C: M.U.T.-III main harness A (applicable to vehicles with CAN communication)
    D: M.U.T.-III main harness B (applicable to vehicles without CAN communication)
    E: Measurement adapter
    F: Trigger harness
 CVT check (M.U.T.-III diagnosis code display and service data display)
caution For vehicles with CAN communication, use the M.U.T.-III main harness A to send the simulated vehicle speed. If you connect the M.U.T.-III main harness B instead, the CAN communication does not function correctly.


MB992006
 Extra fine probe
 Continuity check and voltage measurement at harness wire or connector


MD998330

    A: MD998331
 Oil pressure gauge (3.0 MPa)

    A: Joint
 Hydraulic pressure measurement


MB992127
 Joint


MB991454
 Engine hanger balancer
 Engine assembly support during automatic transmission assembly removal and installation {For the engine hanger balancer (MB991454), use chains only.}
note Engine hanger balancer (MB991454) is a part of the engine hanger assembly (MB991453).


MB991527
 Engine hanger


MB991928

    A: MB991929
    B: MB991930
    C: MB991931
    D: MB991932
    E: MB991933
    F: MB991934
 Engine hanger

    A: Joint (50) x 2
    B: Joint (90) x 2
    C: Joint (140) x 2
    D: Foot (standard) x 4
    E: Foot (short) x 2
    F: Chain and fork assembly


Recommended tool is available from BANZAI LTD. (MZ203830) or from ANZEN MOTOR CAR CO., LTD. (MZ203831).
 Engine mechanical hanger


MB991956
 Engine hanger plate