DISASSEMBLY AND REASSEMBLY







Disassembly steps


1.
Dust seal guard

>>C<<
2.
Oil seal


3.
O-ring

>>B<<
4.
Oil seal


5.
Heat protector

>>A<<
6.
Cover


7.
Magnet plug


8.
Plug


9.
Transfer

REASSEMBLY SERVICE POINT



>>A<< COVER INSTALLATION


1.Apply the sealant to the threaded portion of fastening bolts.

2.Apply a 1.5 mm diameter bead of sealant as illustrated onto the cover.
Specified sealant: Three bond TB1216
3.Attach the cover to the transfer and tighten it to the specified torque of 9.0 ± 2.0 N·m.

>>B<< OIL SEAL INSTALLATION



Using the Special Tools, install the oil seal.

  • Handle (MB992075)

  • Oil seal installer (MB992142)
note Apply Hypoid gear oil to the lip of oil seal.

>>C<< OIL SEAL INSTALLATION



Using the Special Tool, Installer Adapter (MB990936), install the oil seal.
note Apply Hypoid gear oil to the lip of oil seal.