DISASSEMBLY AND REASSEMBLY







Disassembly steps
<<A>>
>>B<<
1.
Differential side bearing
<<B>>
>>A<<
2.
Differential side bearing


3.
Differential sub-assembly


4.
Adjusting shim

DISASSEMBLY SERVICE POINT



<<A>> DIFFERENTIAL SIDE BEARING REMOVAL



Using the Special Tool, Side Bearing Puller (MB990810), remove the inner race of differential side bearing (transmission case side) from the differential sub-assembly.

<<B>> DIFFERENTIAL SIDE BEARING REMOVAL



Using the Special Tool, remove the inner race of differential side bearing (converter housing side) from the differential sub-assembly.

  • Side Bearing Puller (MB990810)
  • Oil Seal Installer (MB991452)

REASSEMBLY SERVICE POINT



>>A<< DIFFERENTIAL SIDE BEARING INSTALLTION


caution
  • Do not re-use the inner race.
  • Replace the inner race together with the outer race.

Using the Special Tool, Bearing Installer (MB992138), install the inner race of reduction gear bearing (converter housing side) on the reduction gear sub-assembly.

>>B<< REDUCTION GEAR BEARING INSTALLATION


caution
  • Do not re-use the inner race.
  • Replace the inner race together with the outer race.

Using the Special Tools, install the inner race of reduction gear bearing (transmission case side) on the reduction gear sub-assembly.

  • Installer Cap (MD998812)
  • Installer-100 (MD998813)
  • Installer Adapter (MD998823)