OUTLANDER 2G year 2008

• Twitter
• Facebook
• Snapchat
• Instagram
• Medium

LOWER ARM BALL JOINT DUST COVER REPLACEMENT

Only when the dust cover is damaged accidentally during maintenance, replace the dust cover as follows:

1.Remove the dust cover.

2.Fill and apply the specified grease into the inside and lip of the dust cover. Specified grease Multipurpose grease SAE J310, NLGI No.2 or equivalent Usage: Inside of dust cover 9.0 ± 1.0 g, Lip: Adequate

3.Use special tool ball joint remover & installer (MB990800) to drive in the dust cover to the point where it contact with the lower arm assembly. 4.Using your fingers, press the dust cover to check for a crack or damage.