OUTLANDER 2G year 2008

• Twitter
• Facebook
• Snapchat
• Instagram
• Medium

CHECK THE STOP LAMP SWITCH CONTINUITY.

caution Do not apply grease or lubricant to the switch and the switch installation section to avoid malfunction of the switch. In addition, do not use gloves which have grease on them.

1.Connect a circuit tester (Ωrange) to the stop lamp switch connector. 2.When no continuity is detected with the plunger pressed from the edge of the outer case by the dimension shown in the figure and when continuity is detected with the plunger released, the stop lamp switch is in good condition.