DISASSEMBLY AND ASSEMBLY

			Disassembly steps
<<A>>	>>A<<	1.	Steering lock bolt
	>>A<<	2.	Steering lock bracket
	>>A<<	3.	Steering lock cylinder assembly
		4.	Steering column shaft assembly

DISASSEMBLY SERVICE POINT

<<A>> STEERING LOCK BOLT REMOVAL

1.Use a drill to make a hole just deeply enough for the tap to stand on the steering lock bolt.
2.Use a left-hand thread tap to remove the steering lock bolt.

REASSEMBLY SERVICE POINT

>>A<< STEERING LOCK BRACKET/STEERING LOCK CYLINDER ASSEMBLY INSTALLATION

1.When installing the steering lock assembly to the steering column shaft assembly, temporarily assemble the steering lock assembly while aligning it with the boss on the column.
2.Make sure that the steering lock operates normally, and then tighten evenly the both steering lock bolt until their head are broken off.