Code No.B1A35 Transponder read error



caution
  • When diagnosis code No. B1A35 is set, be sure to diagnose the CAN bus line.
  • When replacing the ECU, always check that the communication circuit is normal.

DIAGNOSIS FUNCTION




JUDGMENT CRITERIA




PROBABLE CAUSES



  • Malfunction of CAN bus line
  • Malfunction of the ignition key
  • Malfunction of WCM
  • Interference of the key ID

DIAGNOSIS PROCEDURE


STEP 1. M.U.T.-III CAN bus diagnostics



Q. Is the check result normal?





STEP 2. Check the ignition key inserted in the key cylinder for interference.


Q. Are there other ignition keys or anything that interferes with the communication (things that generate radio waves such as magnets or air-cleaning device that has a power plug) near the ignition key inserted in the key cylinder?





STEP 3. Check whether the diagnosis code is reset.



(1)Turn the ignition switch from the LOCK (OFF) position to the ON position.
(2)Check if the diagnosis code is set.

Q. Is the diagnosis code set?





STEP 4. Replace the ignition key with another registered key for the vehicle, and recheck the diagnosis code.



(1)Turn the ignition switch from the LOCK (OFF) position to the ON position.
(2)Check if the diagnosis code is set.

Q. Is the diagnosis code set?





STEP 5. Register the key ID and recheck the diagnosis code.



(1)Turn the ignition switch from the LOCK (OFF) position to the ON position.
(2)Check if the diagnosis code is set.

Q. Is the diagnosis code set?





STEP 6. Replace the ignition key with a new one, and recheck the diagnosis code.



(1)Turn the ignition switch from the LOCK (OFF) position to the ON position.
(2)Check if the diagnosis code is set.

Q. Is the diagnosis code set?