|
|
1.Check that the current tyre inflation pressures meet the inflation pressure label.
|
|
2.Set the vehicle on the speedometer tester.
| note |
Set to the 2WD state.
|
|
|
3.For prevention of front wheel lateral runout, install extension fittings on front towing eye and tie down hook, and install both ends of anchor plate.
4.For prevention of vehicle from starting out, install chain or wire (the other end of which is tightly fixed on rear towing eye) on the vehicle.
5.Check that the speedometer indicating range is within the standard value or the needle fluctuation is within the limit value.
Standard value:
Standard indicator km/h (mph)
|
Allowance range km/h (mph)
|
20 (10)
|
20.0 - 24.0 (10.0 - 12.5)
|
40 (25)
|
40.0 - 44.0 (25.0 - 27.5)
|
80 (50)
|
80.5 - 85.5 (50.3 - 53.5)
|
120 (75)
|
121.5 - 127.5 (76.0 - 80.0)
|
160 (100)
|
162.5 - 169.5 (101.5 - 106.0)
|
200 (125)
|
203.5 - 211.5 (127.2 - 132.2)
|
240 (150)
|
244.5 - 254.5 (152.8 - 159.1)
|
Limit: Indicator deflection (vehicle speed is 35 km/h or more) ±3 km/h
|