A/C-ECU


CONTROL


FORCED DEF CONTROL



MAX COOL, MAX HOT CONTROL



Subject to control
 MAX COOL
 MAX HOT
Air mix damper
 MAX COOL position
 MAX HOT position
Air outlet mode
 FACE position
 FOOT position
Air volume
 Maximum
 Maximum
Outside/inside air selection damper
 Air recirculation position*
 Fresh air position*
Air conditioner switch
 ON*
 OFF*
note "*" indicates that when the automatic control is cancelled because of the customise function, the automatic control is not performed.

IDLE-UP CONTROL



DETECTION CONTROL FOR REFRIGERANT LEAKS



note When abnormality occurs, the A/C indicator flashes.

REAR WINDOW DEFOGGER TIMER CONTROL



PROTECTION CONTROL AT AIR BAG DEPLOYMENT (DURING COLLISION)



CUSTOMISE FUNCTION




  • Automatic control for inside/outside air selection
    Press and hold (approximately for 10 seconds) the inside/outside air selection switch to cancel the automatic control for inside/outside air selection.
  • A/C automatic control
    Press and hold (approximately for 10 seconds) the A/C switch to cancel the A/C automatic control.

COMMUNICATION


1
note : For details of CAN communication, refer to GROUP 54C - Controller Area Network .

DIAGNOSTIC FUNCTION




  • DIAGNOSTIC FUNCTION
  • Service data output
  • Actuator test
note For each item, refer to the Workshop Manual.