FRONT BODY


HEADLAMP SUPPORT



  • The crush box structure has been adopted to the front end of the front sidemember to improve the maintainability at a minor collision and the characteristics at a minor frontal collision.
  • The bolt-on front bumper reinforcement, bolt-on hood lock stay, and bolt-on front end upper bar are used to improve maintainability.
1.
 Front bumper reinforcement plate front
2.
 Front bumper reinforcement plate side
3.
 Horn bracket
4.
 Bumper bracket
5.
 Front bumper reinforcement centre
6.
 Front end upper bar
7.
 Radiator bracket upper
8.
 Front bumper reinforcement plate rear
9.
 Front bumper reinforcement plate
10.
 Front bumper reinforcement bracket lower
11.
 Front bumper reinforcement bracket upper
12.
 Air guide plate
13.
 Hood lock stay reinforcement
14.
 Hood lock stay
15.
 Front end crossmember upper
16.
 Front end crossmember gusset
17.
 Front end crossmember reinforcement
18.
 Radiator bracket lower A
19.
 Radiator bracket lower B
20.
 Front end crossmember lower
21.
 Front end crossmember extension
22.
 Towing hook bracket
23.
 Towing hook
24.
 Towing hook reinforcement
25.
 Bumper bracket lower
26.
 Shipping reinforcement front
27.
 Shipping hook front
28.
 Front end crossmember plate
29.
 Front No. 2 crossmember pipe
30.
 Front end crossmember bulkhead
31.
 Front end crossmember reinforcement lower

FENDER SHIELD



  • The front frame structure is supported in three directions by the dash crossmember centre, dash crossmember lower, and front sidemember rear in order to improve the frontal collision characteristics, and increase the vehicle body rigidity.

  		•
    1.
    		 Front sidemember
    2.
    		 Fender gusset
    3.
    		 Front corner bracket
    4.
    		 Fender bracket lower
    5.
    		 Front end upper bar side
    6.
    		 Fender bracket front
    7.
    		 Upper frame centre bulkhead
    8.
    		 Upper frame rear bulkhead
    9.
    		 Front upper frame inner
    10.
    		 Spring house bracket reinforcement
    11.
    		 Spring house bracket front
    12.
    		 Spring house corner gusset
    13.
    		 Spring house panel rear
    14.
    		 Horn bracket
    15.
    		 Spring house harness bracket
    16.
    		 Suction hose bracket
    17.
    		 Engine mounting bracket upper
    18.
    		 Condense tank reinforcement
    19.
    		 Front fender shield
    20.
    		 Engine mounting gusset
    21.
    		 Fender bracket rear
    22.
    		 Spring house panel
    23.
    		 Power steering reservoir tank bracket
    24.
    		 Engine-ECU bracket
    25.
    		 Clutch tube bracket
    26.
    		 Relay box bracket
    27.
    		 Relay box bracket rear
    28.
    		 Transmission mounting gusset



  • The front part of the front sidemember has hexagonal section that efficiently absorbs energy upon impact.

FRONT SIDEMEMBER REINFORCEMENT
1.
 Front sidemember plate rear
2.
 Headlamp bracket
3.
 Front sidemember outer front
4.
 Upper bar bracket
5.
 Front sidemember outer
6.
 Front sidemember bulkhead front
7.
 Engine mounting bulkhead
8.
 Front brake hose bracket
9.
 Front suspension crossmember bulkhead
10.
 Front sidemember brace upper
11.
 Height sensor bracket
12.
 Front sidemember rear reinforcement lower
13.
 Front sidemember rear bulkhead
14.
 Front sidemember rear
15.
 Dash crossmember extension lower
16.
 Front sidemember brace lower
17.
 Front sidemember inner
18.
 Front suspension crossmember bracket front
19.
 Pipe nut
20.
 Engine mount bracket
21.
 Engine mount reinforcement
22.
 Headlamp support panel






1.
 Headlamp bracket
2.
 Front sidemember plate rear
3.
 Headlamp support panel
4.
 Upper bar bracket
5.
 Battery bracket front
6.
 Battery bracket rear
7.
 Pipe nut
8.
 Front suspension crossmember bracket front
9.
 Dash crossmember extension lower
10.
 Front sidemember brace lower
11.
 Front sidemember rear
12.
 Front sidemember rear reinforcement lower
13.
 Front sidemember rear bulkhead
14.
 Front sidemember brace upper
15.
 Front sidemember inner
16.
 Front suspension crossmember bulkhead
17.
 Front sidemember outer
18.
 Front brake hose bracket
19.
 Transmission mounting bulkhead
20.
 Front sidemember outer front




FRONT DECK



  • The impact absorbing opening on the cowl top outer panel has been added to efficiently absorb energy upon impact and improve the pedestrian protection capability.
1.
 Cowl top lower panel
2.
 Cowl top inner panel
3.
 Wiper bracket
4.
 Cowl top outer panel
5.
 Fender bracket
6.
 Cowl top bulkhead side
7.
 Upper frame extension inner
8.
 Upper frame outer
9.
 Upper frame to front pillar brace
10.
 Deck crossmember stay bracket
11.
 Brake pedal support bracket
12.
 Clutch pedal bracket <LH drive vehicles>
13.
 Brake pedal reinforcement upper

DASH PANEL
1.
 Brake tube bracket
2.
 Dash panel crossmember centre
3.
 Dash crossmember extension
4.
 Dash heat protector bracket
5.
 Clutch pedal reinforcement <RH drive vehicles>
6.
 Accelerator pedal bracket <RH drive vehicles>
7.
 Accelerator pedal bracket lower
8.
 Backbone reinforcement front
9.
 Dash panel lower
10.
 Dash crossmember lower
11.
 Dash crossmember lower bulkhead
12.
 Accelerator pedal bracket <LH drive vehicles>
13.
 Steering shaft bracket
14.
 Dash crossmember side
15.
 Dash panel
16.
 Clutch pedal reinforcement <LH drive vehicles>
17.
 Dash panel reinforcement
18.
 Canister bracket