• Never measure the knee air bag module circuit resistance even with the specified tester. Measuring the circuit resistance with a tester causes accidental air bag deployment due to current that flows or static, resulting in serious personal injury.
  • When replacing the parts, discard the old parts after deploying the air bag according to the specified procedure (Refer to ).
  • There must be no abnormality to the knee air bag deployment section of headlining.
If any malfunction is found in the following inspections, replace with a new knee air bag module.

1.Crack, dent or deformation to inflator surface
2.Torn air bag
3.Damaged connector, deformation of terminal, and harness binding