DIFFERENTIAL



With the introduction of the electronic control 4WD, the electronic control coupling has been installed in front of the differential.
The electronic control coupling transfers the drive force to the rear wheels by pushing the clutch in according to the strength of the magnetic attraction generated by the magnetic coil (For more details, refer to Electronic Control 4WD ).
The following features are also available.


SPECIFICATIONS


Item
Specification
Reduction gear type
Hypoid gear
Reduction ratio
2.352
Differential gear type (Type × Quantity)
Side gear
Straight bevel gear × 2
Pinion gear
Straight bevel gear × 2
Number of teeth
Drive gear
40
Drive pinion
17
Side gear
14
Pinion gear
10
Gear oil
MITSUBISHI MOTORS GENUINE super hypoid gear oil API classification GL-5, SAE 80W
Approx. 0.4 L



DIFFERENTIAL MOUNT




The front side of the differential carrier is installed to the rear suspension crossmember via rear differential mount front bracket (LH/RH). The rear side of the differential carrier is installed to the rear suspension crossmember via rear differential mount insulator. In this way, the adoption of the three-point support type differential mount and the optimization of the layout reduce the vibration and noise.