BUZZER



Using its own signal or signal sent via CAN communication, the combination meter sounds the integrated buzzer.
Item
Relating ECU
Front seat belt reminder function
Combination meter
FCM collision warning buzzer/FCM approaching warning buzzer
ACC/FCM-ECU
ACC approaching warning buzzer
ACC/FCM-ECU
ACC automatic cancelling buzzer
ACC/FCM-ECU
LDW warning buzzer
LDW-ECU
ACC vehicle stop/ACC vehicle-travelling-ahead missing indication buzzer
ACC/FCM-ECU
ACC_FCM set/FCM set/ACC_FCM deactivation/cruise control set indication buzzer
ACC/FCM-ECU, engine-ECU
ASLF overspeed buzzer
Engine-ECU
AS&G buzzer
AS&G-ECU, engine-ECU
Electric steering wheel lock malfunction warning buzzer (vehicles with OSS)
OSS
OSS-related malfunction warning buzzer (vehicles with OSS)
OSS
Engine switch reminder buzzer (vehicles with OSS)
OSS
A/T shift cancel buzzer
CVT-ECU or A/T-ECU
Paddle shift cancel prohibition buzzer <Vehicles with paddle shift>
Security alarm buzzer
ETACS-ECU
Lamp reminder buzzer function
ETACS-ECU
Keyless operation key reminder buzzer (vehicles with KOS)
KOS
Door-ajar warning buzzer function
ETACS-ECU
Freeze warning buzzer
Combination meter
Parking brake reminder buzzer function
Combination meter
Multi-information display interrupt display buzzer
Combination meter
ETACS-ECU function customisation buzzer
ETACS-ECU
A/C operation buzzer
A/C-ECU
Audio operation buzzer
Radio and CD player, Multivision display
Meter information switch or rheostat illumination switch <High contrast meter> operation buzzer
Combination meter
Turn-signal lamp buzzer function
ETACS-ECU
Rest reminder buzzer
Combination meter

FRONT SEAT BELT REMINDER FUNCTION


When the driver’s seat belt is released
  1. When the ignition switch is turned ON, the driver’s seat belt warning lamp illuminates and the buzzer sounds for 6 seconds.
  2. <Vehicles for Russia> 60 seconds after the ignition switch is turned ON, if the vehicle speed exceeds 8 km/h, the driver’s seat belt warning lamp illuminates and blinks for 90 seconds. The buzzer sounds simultaneously with the blinks of the warning lamp.
  3. <Except vehicles for Russia> If the vehicle speed exceeds 8 km/h, the driver’s seat belt warning lamp illuminates and blinks for 90 seconds. The buzzer sounds simultaneously with the blinks of the warning lamp.
  4. On Step 2 or 3 completion, if the seat belt is not fastened when the vehicle speed changes from 3 km/h to 8 km/h, the warning lamp illuminates and blinks again and the buzzer sounds again.
When the front passenger’s seat belt is released
  • Control is the same as when the driver’s seat belt is not fastened.

FCM COLLISION WARNING BUZZER/FCM APPROACHING WARNING BUZZER


Sounds when the FCM activates.

ACC APPROACHING WARNING BUZZER


Sounds when your vehicle is too close to the vehicle travelling ahead during ACC operation.

ACC AUTOMATIC CANCELLING BUZZER


Sounds when the ACC deactivates.

LDW WARNING BUZZER


Sounds when the LDW enters an alert mode.

ACC VEHICLE STOP/ACC VEHICLE-TRAVELLING-AHEAD MISSING INDICATION BUZZER


If the vehicle-travelling-ahead stops during the ACC operation, your vehicle will also stop automatically. When the driver does not depress the brake pedal under this condition, this buzzer will sound. Sounds when the vehicle-travelling-ahead is missing.

ACC_FCM SET/FCM SET/ACC_FCM DEACTIVATION/CRUISE CONTROL SET INDICATION BUZZER


When the cruise control switch or the FCM ON/OFF switch is operated, a buzzer request signal will be sent to the combination meter. Then the combination meter will sound its buzzer.

ASLF OVER SPEED BUZZER


The cruise control system has a speed limiter. If a predetermined speed limit is reached, the buzzer will sound.

AS&G BUZZER


The buzzer will sound if any of the following conditions is satisfied during the Auto Stop & Go (AS&G) system operation.

  • In case the hood is opened.
  • The driver’s seat belt is unfastened and the driver’s door is opened.
  • When detecting that the gearshift lever is in other than neutral position. <M/T>

ELECTRIC STEERING WHEEL LOCK WARNING BUZZER (VEHICLES WITH OSS)


A buzzer will sound when the steering wheel lock is not activated/deactivated normally.

OSS-RELATED MALFUNCTION WARNING BUZZER (VEHICLES WITH OSS)


A buzzer will sound when an error occurs in the OSS-ECU power supply system.

ENGINE SWITCH REMINDER BUZZER (VEHICLES WITH OSS)


With the engine switch in the ON position, when the driver’s door is opened, the buzzer sounds.

A/T SHIFT CANCEL BUZZER/PADDLE SHIFT CANCEL PROHIBITION BUZZER <VEHICLES WITH PADDLE SHIFT>


The buzzer sounds when the shift change on the transmission side is not made although the downshift operation is performed with the selector lever or paddle shift.

SECURITY ALARM


Previous alarm
    Sounds when the system proceeds to an alarm standby state.
Main alarm
    Sounds as prior notice for several seconds before the system proceeds to a alarm state.

LAMP REMINDER BUZZER FUNCTION


With the ignition switch in the LOCK (OFF) position, when the driver’s door is opened with the tail lamp switch remaining ON, the buzzer sounds.

KEYLESS OPERATION KEY REMINDER BUZZER (VEHICLES WITH KOS)


With the ignition switch in the LOCK (OFF) position, when the driver’s door is opened with the keyless operation key left in the vehicle, the buzzer sounds.

DOOR-AJAR WARNING BUZZER FUNCTION


With the ignition switch in the ON position, when any of the doors (including the tailgate) is open and the vehicle speed information sent via the CAN communication is 8 km/h or more, the buzzer sounds.

FREEZE WARNING BUZZER


When the ignition switch is in the ON position, if the ambient temperature is at 3°C or below, the buzzer sounds.

PARKING BRAKE REMINDER BUZZER FUNCTION


With the ignition switch in the ON position, if the parking brake has not been reset (parking brake switch: ON), and when the vehicle speed information transmitted via CAN communication is 8 km/h or more, the buzzer sounds.

MULTI-INFORMATION DISPLAY INTERRUPT DISPLAY BUZZER


When the interrupt display is displayed on the multi-information display because of alarms, the buzzer sounds.

ETACS-ECU FUNCTION CUSTOMIZATION BUZZER


When entering into the customize mode of ETACS-ECU functions or when the customisation is executed, the buzzer sounds in each case.

A/C OPERATION BUZZER, AUDIO OPERATION BUZZER


According to the buzzer sounding request signal which is received when the A/C, radio and CD player, CD changer or audio visual navigation unit is operated, the buzzer sounds.

METER INFORMATION SWITCH OR RHEOSTAT ILLUMINATION SWITCH <HIGH CONTRAST METER> OPERATION BUZZER


When the meter information switch or rheostat illumination switch <High contrast meter> is operated, the buzzer sounds.

TURN-SIGNAL LAMP BUZZER FUNCTION


The buzzer sounds in synchronisation with the turn signal lamp operation.

REST REMINDER BUZZER


When the time to take a rest which was set on the multi-information display is reached, the buzzer sounds.