ETACS-ECU FUNCTIONS AND CONTROLS <Vehicles with security alarm sensor>



SECURITY ALARM FUNCTION





OPERATION


1.Locks the doors by the keyless entry transmitter or keyless operation key (except for operating the door lock with the key cylinder).
2."Ready to be armed" is set, the "Ping" tone sounds and the security indicator starts blinking. (The security alarm sensor is not disabled temporally*1.)
3.After 20 seconds, the status shifts to "Ready to be triggered".
4.Irregular door opening or tailgate opening (opening of door or tailgate without unlocking using the keyless entry transmitter or keyless operation key)
5.After the transferring to the "Warning" status, the ETACS-ECU generates the "Beep" tone, the hazard warning lamp flashes, and the security alarm siren sounds intermittently (Maximum 10 times) for 27 seconds.

note *1: When turning the ignition switch to the "OFF" position and the windshield mist switch to ON for 5 seconds or longer (operate the wiper lever upward), the buzzer incorporated in the combination meter sounds once and the security alarm sensor is disabled until the ignition switch is turned to the "ACC" or "ON " position. To reactivate the security alarm sensor, turn the windshield mist switch to ON for 5 seconds or longer (operate the wiper lever upward). When the security alarm is activated, the buzzer incorporated in the combination meter sounds twice.

ALARM HISTORY OUTPUT FUNCTION


If the exterior protection is activated between the last OFF operation and the next ON operation of the ignition switch, this function informs the driver by flashing the security alarm indicator and by the buzzer.