CODING LIST <PHEV>



caution With the ETACS functions being customised, if one or more of the ETACS-ECU variant coding and option coding items are changed, the customised contents are reset. In such case, the functions need to be customised again.
Before troubleshooting, check that the coding data written into the engine-ECU, the SRS-ECU, the ETACS-ECU and the PHEV-ECU are normal. If they are not the same as the initial settings, various functions and systems do not work normally.

VARIANT CODING


The coding data can be checked by operating M.U.T.-III.


note For details on how to use the M.U.T.-III, refer to the "M.U.T.-III operation manual."
1.The power supply mode of the electric motor switch should be turned off.
2.Start up the personal computer.
3.<When the special tool V.C.I.-Lite (MB992744) is used>
Connect the special tool V.C.I.-Lite USB cable (MB992747/MB992748) to the V.C.I.-Lite and the personal computer.
<When the special tool V.C.I. (MB991824) is used>
Connect the special tool V.C.I. USB cable (MB991827) to the V.C.I. and the personal computer.
4.<When the special tool V.C.I.-Lite (MB992744) is used>
Connect the special tool M.U.T.-III V.C.I.-Lite main wiring harness A (MB992745) to the V.C.I.-Lite.
<When the special tool V.C.I. (MB991824) is used>
Connect the M.U.T.-III main wiring harness A (special tool: MB991910) to the V.C.I.
5.<When the special tool V.C.I.-Lite (MB992744) is used>
Connect M.U.T.-III V.C.I.-Lite main wiring harness A to the diagnosis connector.
<When the special tool V.C.I. (MB991824) is used>
Connect M.U.T.-III V.C.I. main wiring harness A to the diagnosis connector.
6.<When the special tool V.C.I.-Lite (MB992744) is used>
Turn the V.C.I.-Lite power switch to the "ON" position.
note When the V.C.I.-Lite is energised, the V.C.I.-Lite indicator lamp will be illuminated in green.
<When the special tool V.C.I. (MB991824) is used>
Turn the V.C.I. power switch to the "ON" position.
note When the V.C.I. is turned ON, the V.C.I. indicator lamp will be illuminated in green.
7.Start the M.U.T.-III system on the PC and turn on the power supply mode of the electric motor switch.
8.On "System selection" screen, select "MPI/GDI/Diesel" for engine-ECU related data, "SRS-AIR BAG" for SRS-ECU related data, "ETACS" for ETACS-ECU related data, "PHEV-ECU" for PHEV-ECU related data, respectively.
9.Select "Coding."
10.Select "Coding information & copy."
11.
caution Refer to the "M.U.T.-III operation manual" and perform coding.
If the displayed coding information is different from the corresponding initial setting in the list, replace the ECU with a correctly coded one. When the engine-ECU is replaced, refer to GROUP 13E - Engine-ECU . When the SRS-ECU is replaced, refer to GROUP 52B - SRS Control Unit . When the ETACS-ECU is replaced, refer to GROUP 54A - ETACS . When the PHEV-ECU is replaced, refer to GROUP 54D - PHEV-ECU .

ENGINE ECU CODING DATA LIST


note The items to be displayed may differ depending on the version of the M.U.T.-III.
Item name
Initial value
Vehicle Model
OUTLANDER PHEV
Model year
(Displays the model year)
Destination
EUR
Engine type
4B11 D4 MIVEC
S/W variation
No.1

SRS-ECU CODING DATA LIST


note The items to be displayed may differ depending on the version of the M.U.T.-III.
Item name
Initial value
DR airbag squib(1st)
Present
PS airbag squib(1st)
Present
DR airbag squib(2nd)
Not present
PS airbag squib(2nd)
Not present
DR pretensioner squib
Present
PS pretensioner squib
Present
PS lap pretensioner squib
Not present
RH side airbag squib
Present
LH side airbag squib
Present
RH curtain airbag squib
Present
LH curtain airbag squib
Present
DR knee airbag squib
Present
Occupant classification module
Not present
DR seat position sensor
Not present
Seatbelt warning indicator(CAN)
Not present
PS cut off SW
Present
DR buckle SW (mecha)
Not present
DR buckle SW (hall)
Not present
PS buckle SW (mecha)
Not present
PS buckle SW (hall)
Not present
Passenger’s SRS OFF lamp
Present
Passenger’s SRS ON lamp
Present
LH front G sensor
Present
RH front G sensor
Present
RH side sensor B-pillar
Present
LH side sensor B-pillar
Present
Roll over sensor
Not present
Disposal
Present
High volt.cutoff
Present
Emergency call
Not present
Crash parameter flag(#0)
on

ETACS-ECU CODING DATA LIST


note The items to be displayed may differ depending on the version of the M.U.T.-III.
Item name
Initial value
Vehicle line
C-SUV(PHEV)
Model year
(Displays the model year)
Handle side
LHD or RHD
Destination
EUR
Transmission
TRANS AXLE
Engine type
4B11 D4 MIVEC
Smart entry system
Type B
Keyless entry
Present
Immobilizer
Type A
WCM/KOS
Present
Panic Alarm
Enable
OSS
Present
KOS LF output
Type 3
KOS SW type(Gate/trunk)
Gate 2SW
Engine Type for OSS
EV
Transmission Type for OSS
Undefined
TPMS*1
Not present
TPMS information
N/A
TPMS Off mode function
Not present
AUDIO
Not present/Present
AND
Not present/Present
Destination for HFM
EUR
Entertainment Vehicle Line
OUTLANDER PHEV
Entertainment model year
(Displays the model year)
Radio Frequency
EUR
Number of speaker
Premium RF or 6 speakers
AUX equipment
Not Present
KOS door entry type
Switch
Corner sensor control unit
Not present/Present
CAMERA
Not present
Rear view camera
Not present/Present
Nose view camera
Not present
Left side view camera
Not present
FCM function
Not present/Present
FCM type
Undefined/Type 1
ACC type
Undefined/Type 12
ACC
Not present/Present
ACC function
Not present/Present
Remote engine starter
NotPresent/ChgOk
IG key illumination
W/ getting off
Comfort flasher type
Present/Chg Ok
Trailer turn detection
Present
Front wiper
Rain Sensitive
After wipe customize
Enable(def.E)
Rear wiper mode
With Lo control
Rear wiper by reverse customize
Enable(d.FR/RR)
Auto fold mirror
Keyless/KOS
Manner Switch
NotPresent/ChgNg
Auto lamp control
Hi RLS/Chg Ng
Coming home lamp customize
Enable(def.E)
Welcome lamp customize
Enable(d.Small)
Room lamp delay timer/door & H/L
Short
Room lamp by H/L
Full
Gate/Trunk lamp
Mode-2 (cargo)
Head lamp auto cut
Enable
Head lamp auto cut mode
B spec.
Door Unlock Mode Customize
Disable/Customize Enable
Door unlock by IG lock customize
Disable/Enable(def.D)
Key reminder unlock
Disable
Horn chirp by keyless
NotPresent/ChgNg
Security alarm function
NotPresent/ChgOk
Security alarm mode
Not present/A-spec
Pre-alarm
Not present/Present
Security alarm sensor
Not present/Present
Security alarm siren
Not present/Present
Security sensor gain setting
Type 1/Type 3/Type 4
Siren answer
Disable
EV REMOTE-ECU
Not present/Present
Security type(EV REMOTE)
Not Present/Type A
Security alarm(EV REMOTE)
Not present/Present
Door control(EV REMOTE)
Not present
Panic Alarm control(EV REMOTE)
Not present
Position lamp control(EV REMOTE)
Not present/Present
Head lamp control(EV REMOTE)
Not present/Present
Horn control(EV REMOTE)
Not present
Battery reminder(EV REMOTE)
Not present
Battery charge(EV REMOTE)
Not present/Present
Pre-A/C control(EV REMOTE)
Not present/Present
Power window type
Type 5(NAFTA)
Power window Dr
Not present
Power window As
Not present
Power window RR
Not present
Power window RL
Not present
Multi mode RKE
Present
Gate/Trunk
Gate type
RLS overwipe type
Type 1/Type 2
RLS WS type
Type 2 (Green)
RLS
Present
RLS Communication Type
LIN/CAN
LDW equipment status
Not Present/Type B
LDW Parameter status
Not parameter/Type 5/Type 6
LDW production setup status
LDW production setup status
LDW
Not present/Present
ORC
Present
DRL type*
Independent DRL
DRL function
Present/Chg Ng
Electric Slide door (Left)
Not present
Electric Slide door (Right)
Not present
Sun roof type
Not present/Type S2
Sun roof
Not present/Present
Rear S/R Unlock Output
Not present
ETG
Not present/Present
Head lamp
4 beams
Head lamp washer
Disable/Popup2 w/ washer
Fold mirror
Enable
Front fog lamp mode
B spec.
Front fog lamp
Present
Rear fog lamp
Present/Chg Ng
Door lock system
B-Spec/exceptUSH/E-spec/exceptDLH
Gate/trunk opener mode
Present(Type 1)
Horn type
Dual horn
H/L leveling type
Not present/2 height sensor
Head Lamp Leveling system type
OUTLANDER PHEV
Rear wiper
Enable
Wiper washer check valve
Present
Inteligent/Comfort washer custom
Enable(def.E)
ESS by turn lamp
Present
Turn signal bulb
21/21/21/21/0.36
ESL
Not present
Final drive
4WD FF Base
T/M oil cooler
Not present
S-AWC
Not present
TCM
Not present
Shift lock
Not present
Transmission control type
Def./Not present
Average speed
Not available
Coolant temp gauge threshold
Normal
Vehicle language status
English
Fuel consumption scale
L/100km/MPG (UK)
Tyre circumference
2155mm
Frost warning threshold
EUR
Distance to empty
Not available
Average fuel consumption
Available
Instant fuel consumption
Not available
Seat belt reminder logic
EU
Rear door type
HINGE
Shift Display Layout
RHD
Trip autoreset IG OFF
Available
GCC speed alarm indicator
Not present
AS&G status
Not present
Gear shift reminder
Present
Reverse alarm
Not available
Seat belt reminder control type
Non AABT
Charging Time Display
Present
Seat belt reminder indicator
D&P independent
Key reminder
Not available
Brake vacuum warning
Present
GCC speed alarm
Not available
Rent-a-car mode IG-OFF always
Available
S-AWC Control display
Available
Service reminder schedule table
Normal
Display opening type
OEM1
Language mode
Available
Fuel tank type
Type 2
GSI system
Not present
Launch gear block alarm
Not present
Service reminder for month
12 month
Service reminder for km
20000km
Service reminder for mile
12500mile
Drive mode
Present
A/C control type
EUR
ECO gauge
Not present
ECO score
Present
Electric motor switch reminder
Present
Gate/Trunk
Gate type
Steering Wheel Switch
Present
Distance to empty(PHEV)
Present
Energy Flow
Present
EV ratio
Present
Outside temperature
Present
ECO SW(Except for PHEV)
Not present
OCM
Not present
A/C
Present
Indirect lamp
Not present
Room lamp Centre Switch
Not present
Compressor type
Type 6
Temperature type
Celsius
Option Heater
Not present/Present
Indirect lamp type
Type1/No present
Heater Control Panel Type
Dual LCD
EPS
Present
EPS type
Type 2
ABS
Not present
Vehicle Type for A.S.C.
Type 5
Brake Type for A.S.C.
Type 2
HBA Type
Type 1
ABS Type
Type 1
TCL Type
Type 14
A.S.C Type
Type 5
A.S.C.
Present
HSA Type
Type 1
AS&G brake hold Type
Not present
Brake prefill
Present
Brake fade support
Not present
S-AWC Brake
Present
Enhanced TCL
Not present
TSA Type
Not present
ACC Type for A.S.C.
Not present/Type 4
FCM Type for A.S.C.
Not present/Type 1
Engine power
Normal
Water separate warning
Not present
Cooling fan
PWM control
Auto Stop & Go (AS&G)
Not present
EV
Present
ETG Buzzer
Not present
ETG Answerback
Not present
note *: The setting can be changed by the option coding. Refer to .

PHEV-ECU CODING DATA LIST


note The items to be displayed may differ depending on the version of the M.U.T.-III.
Item name
Initial value
IMMOBILIZER
Present
Adaptive Cruise Control
Not present/Present
Paddle Shift
Not present/Present
Electric Heater for A/C
Not present/Present
Tyre Circumference
2155 mm
EV Remote System
Not present
Speed Limit Function
Present
Cruise Control
Present

OPTION CODING


caution
  • If there is any item indicated by the option coding after equipment change, set ETACS-ECU so that the option coding data corresponds with the equipment content. Pay attention to that the concerned functions and systems do not work normally if the setting does not correspond with the equipment.
  • With the ETACS functions being customised, if any of the ETACS-ECU option coding items are changed, the customised contents are reset. In such case, the functions need to be recustomised.
The ETACS-ECU option coding data can be checked or changed by operating M.U.T.-III.

  1. Connect the M.U.T.-III. Refer to .
  2. Select "ETACS" on the system selection screen.
  3. Select "Coding."
  4. Select "Option Coding Information."
  5. Check the displayed option coding information.

  1. Connect the M.U.T.-III. Refer to .
  2. Select "ETACS" on the system selection screen.
  3. Select "Coding."
  4. Select "Option Coding."
  5. Change to correct option coding data.

LIST <ETACS-ECU>
Item name
Auto lamp control
Keyless entry
AUDIO
RLS
Number of speaker
Radio Frequency
Front fog lamp
Rear fog lamp
Horn type
Manner Switch
Remote engine starter
AND
Compressor type
DRL function
Wiper washer check valve
ESS Cancel Function
EV REMOTE-ECU
Security type(EV REMOTE)
Panic Alarm
Door Unlock Mode Customize
Front wiper

Reference chart <PHEV-ECU>
Item name
EV Remote System
Speed Limit Function
Cruise Control