PROCEDURE FOR DRIVE BATTERY ACCEPTANCE JUDGEMENT <PHEV>



INSPECTION PROCEDURE


If any abnormality is found after following inspections, replace the drive battery.
1.Check of whether or not diagnosis code is stored
2.Check of battery tray cracking and double frame cracking/flaw

Measuring the distances on the sheet-metal tray (drive battery)


Perform the measurement with using the tracking gauge, convex, or others. The indicated numbers are provided for a reference.


No.
Measurement point
Measured distance
Measurement reference point
Measurement end point
Dimension
1
E
A
1208.8
2
E
B
979.8
3
E
C
720.2
4
E
D
678.0
5
E
F
243.0
6
E
G
655.6
7
E
H
964.9