REMOVAL AND INSTALLATION


For the service procedures other than described below, refer to GROUP 11A - Camshaft

Pre-removal Operation
  • Engine Room Under Cover Front A, B and Engine Room Side Cover (RH) Removal (Refer to GROUP 51 - Under Cover ).
  • Air Cleaner Assembly Removal (Refer to GROUP 15 - Air Cleaner ).
  • Vacuum Pipe Assembly Removal (Refer to GROUP 35A - Master Cylinder Assembly and Brake Booster Assembly <LHD>, <RHD>).

Post-installation Operation
  • Vacuum Pipe Assembly Installation (Refer to GROUP 35A - Master Cylinder Assembly and Brake Booster Assembly <LHD>, <RHD>).
  • Air Cleaner Assembly Installation (Refer to GROUP 15 - Air Cleaner ).
  • Engine Room Under Cover Front A, B and Engine Room Side Cover (RH) Installation (Refer to GROUP 51 - Under Cover ).





Camshaft removal steps (Cont.)


·
Ignition coil (Refer to GROUP 16 - Ignition System, Ignition Coil )


1.
Breather hose


2.
PCV hose connection


·
Control wiring harness connection
<<A>>
>>G<<
3.
Rocker cover assembly


4.
Rocker cover gasket
<<B>>

·
No.1 cylinder compression top dead centre setting <only at removal>.


·
Valve clearance adjustment (Refer to ) <only at installation>.


5.
Service hole bolt
<<C>>

·
Camshaft and camshaft sprocket assembly (exhaust side) removal preparatory operation <only at removal>.
<<D>>
>>F<<
6.
Camshaft bearing front cap assembly

>>E<<
7.
Camshaft bearing
<<E>>
>>D<<
8.
Camshaft bearing oil feeding cap (exhaust side)
<<E>>
>>D<<
9.
Camshaft bearing cap (exhaust side)
<<E>>
>>D<<
10.
Camshaft bearing cap (exhaust side)
<<E>>
>>D<<
11.
Camshaft bearing thrust cap (exhaust side)
<<F>>
>>E<<
12.
Camshaft and camshaft sprocket assembly (exhaust side)
<<G>>
>>B<<
13.
Exhaust camshaft sprocket
<<G>>
>>B<<
14.
Camshaft (exhaust side)

>>E<<
15.
Camshaft bearing
<<E>>
>>D<<
16.
Camshaft bearing oil feeding cap (inlet side)
<<E>>
>>D<<
17.
Camshaft bearing cap (inlet side)
<<E>>
>>D<<
18.
Camshaft bearing cap (inlet side)
<<E>>
>>D<<
19.
Camshaft bearing thrust cap (inlet side)

>>C<<
20.
Camshaft and camshaft sprocket assembly (inlet side)
<<G>>
>>B<<
21.
Inlet V.V.T. sprocket assembly
<<G>>
>>B<<
22.
Camshaft (inlet side)



Oil feeder control valve removal steps 


·
Oil feeder control valve (OCV) inlet connector connection
<<H>>
>>A<<
23.
Oil feeder control valve (OCV) inlet

>>A<<
24.
O-ring