REMOVAL AND INSTALLATION


Due to the following change, the following service procedures have been established. For the other procedures, refer to GROUP 11B - Alternator and Ignition System .


REMOVAL SERVICE POINT



<<A>> CRANKSHAFT PULLEY CENTRE BOLT REMOVAL



1.Use special tool Flywheel stopper (MD998781) to secure the flywheel.
2.Remove the crankshaft pulley centre bolt.

INSTALLATION SERVICE POINT



>>B<< CRANKSHAFT PULLEY/CRANKSHAFT PULLEY WASHER/CRANKSHAFT PULLEY CENTRE BOLT INSTALLATION


In the same manner as with removal, counterhold the flywheel using the special tool Flywheel Stopper (MD998781).