Code No. P2124: Accelerator Pedal Position Sensor (Main) Circuit High Input Intermittent




OPERATION




FUNCTION




TROUBLE JUDGMENT


Check Conditions
Judgment Criterion

FAIL-SAFE AND BACKUP FUNCTION




PROBABLE CAUSES




DIAGNOSIS PROCEDURE


STEP 1. M.U.T.-III data list



  • Refer to Data List Reference Table .

  1. Item 9: Accelerator pedal position sensor (main)

Q. Is the check result normal?

Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).
Go to Step 2.

STEP 2. Perform resistance measurement at accelerator pedal position sensor connector.



  • Disconnect connector, and measure at harness side.
  • Resistance between terminal engine-ECU APSE line and body earth.
OK: Continuity (2 Ω or less)

Q. Is the check result normal?

Go to Step 5.
Go to Step 3.

STEP 3. Check harness between accelerator pedal position sensor connector terminal and engine-ECU connector terminal APSE.



  • Check earthing line for open circuit and damage.

Q. Is the check result normal?

Go to Step 4.
Repair or replace the connector, or repair the damaged harness wire.

STEP 4. M.U.T.-III data list



  • Refer to Data List Reference Table .

  1. Item 9: Accelerator pedal position sensor (main)

Q. Is the check result normal?

Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).
Replace the engine-ECU.

STEP 5. Replace the accelerator pedal assembly



  • After replacing the accelerator pedal assembly, re-check the trouble symptoms.

Q. Is the check result normal?

The check is end.
Replace the engine-ECU.