FUEL GAUGE UNIT REPLACEMENT <4WD (Except PHEV)>


1.Remove the second seat assembly (Refer to GROUP 52A - Second Seat Assembly ), and turn up the floor carpet.

2.Remove the floor inspection lid (RH).

3.Disconnect the fuel gauge unit connector.

4.
caution Pay attention not to damage the gauge unit and the float of fuel gauge unit when withdrawing it from the service hole.
Remove the fuel gauge unit mounting nuts, and remove the fuel gauge unit from service hole.
5.Replace the fuel gauge unit gasket with a new one.

6.
caution Pay attention not to damage the gauge unit and the float of fuel gauge unit when installing it to the fuel tank through the service hole.
Install the fuel gauge unit to the fuel tank through the service hole, and tighten the mounting nuts to the specified torque.
Tightening torque: 2.5 ± 0.4 N·m

7.Connect the fuel gauge unit connector.

8.Install the floor inspection lid (RH).
9.Return the floor carpet to the original condition and install the second seat assembly (Refer to GROUP 52A - Second Seat Assembly ).