DISASSEMBLY AND REASSEMBLY <4B1-PHEV>







Disassembly steps


1.
Fuel pump bracket plate
<<A>>
>>A<<
2.
Fuel pump and gauge assembly
<<A>>
>>A<<
3.
Suction hose connection


4.
Fuel pump and gauge assembly gasket


5.
Fuel tank heat protector


6.
Stopper


7.
Fuel tank

DISASSEMBLY SERVICE POINT



<<A>> FUEL PUMP AND GAUGE ASSEMBLY/SUCTION HOSE REMOVAL


caution Pay attention not to damage the gauge unit and the float of fuel pump and gauge assembly when removing it from the fuel tank.

While removing the fuel pump and gauge assembly from the fuel tank, disconnect the suction hose from the fuel pump and gauge assembly to remove the fuel pump and gauge assembly from the fuel tank.

REASSEMBLY SERVICE POINT



>>A<< SUCTION HOSE/FUEL PUMP AND GAUGE ASSEMBLY INSTALLATION


caution
  • When installing the fuel pump and gauge assembly into the fuel tank from the service hole, be careful not to damage the gauge unit and the float. In addition, be careful that the float does not catch the suction hose inside the fuel tank.
  • When installing the fuel pump and gauge assembly to the fuel tank, check that the gauge moving area moves smoothly.

While inserting the fuel pump and gauge assembly into the fuel tank, connect the suction hose to the fuel pump and gauge assembly to install the fuel pump and gauge assembly to the fuel tank.