REMOVAL AND INSTALLATION <4B1, 4J1>



Pre-removal Operation
  • Engine Coolant Draining (Refer to ).
  • Drive Belt Removal (Refer to GROUP 11A - Crankshaft Pulley <4B1-Except PHEV>).
  • Water Pump Drive Belt Removal (Refer to GROUP 11G - Crankshaft Pulley <4B1-PHEV>).
  • Drive Belt Removal (Refer to GROUP 11C - Crankshaft Pulley <4J1>).

Post-installation Operation
  • Drive Belt Installation (Refer to GROUP 11A - Crankshaft Pulley <4B1-Except PHEV>).
  • Water Pump Drive Belt Installation (Refer to GROUP 11G - Crankshaft Pulley <4B1-PHEV>).
  • Drive Belt Installation (Refer to GROUP 11C - Crankshaft Pulley <4J1>).
  • Drive Belt Tension Check (Refer to GROUP 11A - On-vehicle Service, Drive Belt Tension Check and Adjustment <4B1-Except PHEV>).
    Drive Belt Tension Check (Refer to GROUP 11G - On-vehicle Service, Drive Belt Tension Check and Adjustment <4B1-PHEV>).
    Drive Belt Tension Check (Refer to GROUP 11C - On-vehicle Service, Drive Belt Tension Check and Adjustment <4J1>).
  • Engine Coolant Refilling (Refer to ).





Removal steps


1.
Water pump pulley


2.
Water inlet pipe mounting nuts


3.
Water pump



Water inlet pipe gasket


5.
Water pump gasket