REMOVAL AND INSTALLATION <FRONT>



Pre-removal and post-installation operation
  • Motor Coolant Draining and Refilling (Refer to ).
  • Air Cleaner Intake Duct Removal and Installation (Refer to GROUP 15 - Air cleaner <PHEV>).
  • Headlamp Support Upper Panel Cover and Radiator Grille Removal and Installation (Refer to GROUP 51 - Radiator Grille ).
  • Airguide Upper Removal and Installation (Refer to GROUP 42A - Loose Panel ).
  • Front Bumper Assembly Removal and Installation (Refer to GROUP 51 - Front Bumper Assembly ).
  • Engine Room Under Cover Front A, B Removal and Installation (Refer to GROUP 51 - Under Cover <PHEV>).





EV radiator condenser tank hose removal steps
<<A>>
>>A<<
1.
EV radiator condenser tank hose A
<<A>>
>>A<<
2.
EV radiator condenser tank hose B



EV radiator piping hose/EV radiator pipe removal steps
<<A>>
>>A<<
3.
EV radiator piping hose F
<<A>>
>>A<<
4.
EV radiator pipe E
<<A>>
>>A<<
5.
EV radiator piping hose G
<<A>>
>>A<<
6.
EV radiator piping hose E


·
Remove the hose clip from EV oil cooler hose A which is assembled into EV radiator pipe D (Refer to ).
<<A>>
>>A<<
7.
EV radiator pipe D
<<A>>
>>A<<
8.
EV radiator piping hose D
<<A>>
>>A<<
9.
EV radiator pipe C
<<A>>
>>A<<
10.
EV radiator piping hose H
<<A>>
>>A<<
11.
EV radiator pipe F
<<A>>
>>A<<
12.
EV radiator piping hose J

REMOVAL SERVICE POINTS



<<A>> EV RADIATOR CONDENSER TANK HOSE, EV RADIATOR PIPING HOSE AND EV RADIATOR PIPE REMOVAL



Make mating marks on the hose and the hose clip as shown to install them in the original position.

INSTALLATION SERVICE POINT



>>A<< EV RADIATOR CONDENSER TANK HOSE, EV RADIATOR PIPING HOSE AND EV RADIATOR PIPE REMOVAL


caution A broken hose clip should not be reused as it will rust.
1.Make mating mark on a new hose clip in the same position as the remove one.

2.Insert the hose until the protrusion of the fitting or pipe.
3.Align the mating marks on the hose and hose clip.