OIL CHANGE



1.Remove the drain plug and the gasket to drain the oil.
2.Install the drain plug with a new gasket, then tighten them to the specified torque.
Tightening torque: 65 ± 5 N·m


3.Remove the oil filler plug and the gasket, and then fill the oil up to the lower edge of the oil level plug hole.
Recommended oil: MITSUBISHI MOTORS GENUINE CVTF-J4
Quantity: 1.5 L


4.Remove the oil level plug and the gasket to check the oil level.
5.Install the oil level plug and a new gasket, then tighten them to the specified torque.
Tightening torque: 39 ± 2 N·m
caution When the EV oil cooler is removed, install the oil level plug and then add the oil of approx. 0.45 dm3. (The total oil capacity is approx. 2.2 dm3)

6.Install the oil filler plug and new gasket, then tighten them to the specified torque.
Tightening torque: 32 ± 2 N·m