REMOVAL AND INSTALLATION



Pre-removal and post-installation operation
  • Oil Draining and refilling (Refer to ).
  • Engine Room Under Cover Front A, B Removal and Installation (Refer to GROUP 51 - Under Cover <PHEV>).
  • Front Bumper Assembly Removal and Installation (Refer to GROUP 51 - Front Bumper Assembly ).





Removal steps
<<A>>
>>A<<
1.
EV oil cooler hose D
<<A>>
>>A<<
2.
EV oil cooler hose E
<<A>>
>>A<<
3.
EV oil cooler pipe A
<<A>>
>>A<<
4.
EV oil cooler hose F
<<A>>
>>A<<
5.
EV oil cooler hose C

>>B<<
·
hose clip on EV oil cooler hose A
<<A>>
>>A<<
6.
EV oil cooler hose A
<<A>>
>>A<<
7.
EV oil cooler hose G
<<A>>
>>A<<
8.
EV oil cooler hose M
<<A>>
>>A<<
9.
EV oil cooler hose B
<<A>>
>>A<<
10.
EV oil cooler pipe B
<<A>>
>>A<<
11.
EV oil cooler hose H
<<A>>
>>A<<
12.
EV oil cooler hose J
<<A>>
>>A<<
13.
EV oil cooler pipe C
<<A>>
>>A<<
14.
EV oil cooler hose K
<<A>>
>>A<<
15.
EV oil cooler hose L

REMOVAL SERVICE POINTS



<<A>> EV OIL COOLER HOSE REMOVAL



Make mating marks on the hose and the hose clip as shown to install them in the original position.

INSTALLATION SERVICE POINT



>>A<< EV OIL COOLER HOSE AND EV OIL COOLER PIPE CONNECTION


caution A broken hose clip should not be reused as it will rust.


note Install the brackets on EV oil cooler pipes A and B as shown.
1.Make mating mark on a new hose clip in the same position as the remove one.

2.Insert the hose until the protrusion of the pipe or fitting.
3.Align the mating marks on the hose and hose clip.

>>B<< POSITIONING THE HOSE CLIP ON EV OIL COOLER HOSE A




  • Install hose clip A and B to EV oil cooler hose A according to the procedure below:
1.Align the end of the hose clip with the hose mark.

2.Install hose clip A to the hole on the electric oil pump bracket (Refer to ), hose clip B to the hole on the bracket on EV radiator pipe D (Refer to ), respectively.