CODE NO. P1565: ACC Target Torque <ACC>



caution If diagnosis code NO. P1565 is stored in the engine-ECU, surely perform CAN bus line diagnosis.
caution Replace ECU after certainly confirming that the communication circuits are normal.

DIAGNOSIS CODE SET CONDITIONS


This diagnosis code is stored when the abnormality below is detected:


PROBABLE CAUSES




DIAGNOSIS PROCEDURE


STEP 1. M.U.T.-III CAN bus diagnosis



  • Use M.U.T.-III to perform CAN bus line diagnosis.

Q. Is the check result normal?

Go to Step 2.
Repair CAN bus line (Refer to GROUP 54C - Troubleshooting - CAN Bus Diagnostics Table ). After repairing CAN bus line, go to Step 5.

STEP 2. M.U.T.-III diagnosis code



  • Confirm the diagnosis code is stored in the ASC-ECU.

Q. Is diagnosis code stored?

Perform troubleshooting of the active stability control (ASC) system (Refer to GROUP 35C - Troubleshooting - Diagnosis Code Chart ).
Go to Step 3.

STEP 3. Check the diesel fuel system diagnosis code.


Using M.U.T.-III, perform diesel fuel system diagnosis code (Refer to GROUP 13D - Troubleshooting, Diagnosis Function ).

Q. Is any diagnosis code stored?

Repair the diesel fuel system (Refer to GROUP 13D - Troubleshooting, Inspection Chart for Diagnosis Code ). Then go to Step 5.
Go to Step 4.

STEP 4. Read the diagnosis code.


(1)Use the M.U.T.-III, erase the diagnosis code of the cruise control system.
(2)Turn the ignition switch to the "ON" position, and press the ACC ON/OFF switch to turn the cruise control system to ON (the cruise control display screen is turned on).
(3)After turning the cruise control system to ON, when 2 minutes or more has elapsed without operating the cruise control switches, read the diagnosis code of the cruise control system (Refer to ).

Q. Is diagnosis code No. P1565 stored?

Replace the engine-ECU (Refer to GROUP 13D - Engine-ECU ). Then go to Step 5.
It can be assumed that this malfunction is intermittent (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points, How to Cope with Intermittent Malfunction ).

STEP 5. Read the diagnosis code.


(1)Use the M.U.T.-III, erase the diagnosis code of the cruise control system.
(2)Turn the ignition switch to the "ON" position, and press the ACC ON/OFF switch to turn the cruise control system to ON (the cruise control display screen is turned on).
(3)After turning the cruise control system to ON, when 2 minutes or more has elapsed without operating the cruise control switches, read the diagnosis code of the cruise control system (Refer to ).

Q. Is diagnosis code No. P1565 stored?

Return to Step 1.
This procedure is complete.