TRANSAXLE FLUID CHANGE




1.Remove the drain plug and gasket, to drain the fluid.
2.Install the drain plug and new gasket, and tighten to the specified torque.
Tightening torque: 32 ± 2 N·m
3.Remove the weight from the rear suspension crossmember.
4.Remove the filler plug and gasket, and fill the fluid up to the lower edge of the filler plug hole.
Brand name:
MITSUBISHI MOTORS GENUINE ATF SP III
Quantity: 0.85 L
5.Install the filler plug and new gasket, and tighten to the specified torque.
Tightening torque: 32 ± 2 N·m
6.Install the weight to the rear suspension crossmember.