SELECTOR LEVER (JOYSTICK TYPE) OPERATION CHECK


note
  • To select the N position, turn on the power supply mode of the electric motor switch and depress the brake pedal.
  • To select the R or D position, depress the brake pedal with the ready indicator illuminated.
  • To select the B position, select the D position beforehand.
1.Apply the parking brake.

2.Move the selector lever to every position and check that the lever moves smoothly with secure feel of engagement.
3.Wait until the ready indicator illuminates, and then release the parking brake.
4.When the selector lever is tilted towards the D position, the "D" indicator must be illuminated and the vehicle must move forwards.
5.When the selector lever is tilted towards the B position over the D position, the indicator must be changed and the vehicle must move forwards.
(When the selector lever is tilted towards the B position, the indicator will be changed as follows.)

  • Vehicles without paddle shift
    Tilt the selector lever towards B position (once): B1
    Tilt the selector lever towards B position (twice): B2
    Tilt the selector lever towards B potion (three times or more): stays in B2 (The displayed position remains B2).
    Tilt the selector lever towards B position: D
  • Vehicles with paddle shift
    Tilt the selector lever towards B position (once): B3
    Tilt the selector lever towards B position (twice): B5
    Tilt the selector lever towards B potion (three times or more): stays in B5 (The displayed position remains B2).
    Tilt the selector lever towards B position: D
6.When the selector lever is tilted towards the R position, the "R" indicator must be displayed, the backup lamps must be illuminated and the buzzer must sound. Then the vehicle must move backwards.
7.When the selector lever is tilted towards the N position, the "N" indicator must be illuminated and the vehicle must be stationary.
8.When the electrical parking switch is pressed, the "P" indicator must be illuminated and the vehicle must be stationary. The indicator on the electrical parking switch must also be illuminated.
9.Apply the parking brake and then turn the power supply mode of the electric motor switch to OFF.