DISASSEMBLY AND REASSEMBLY







Disassembly steps
<<A>>
>>A<<
1.
Plug


2.
Connector

DISASSEMBLY SERVICE POINT



<<A>>CONNECTOR REMOVAL



1.
caution Do not stretch or twist the wiring harness wire.
Unhook the wiring harness wire from the valve body assembly as shown.
2.Unlock the connector to disconnect it.
3.Remove the connector mounting bolt, and remove the connector from the valve body.

REASSEMBLY SERVICE POINT



>>A<< CONNECTOR INSTALLATION



1.
caution Do not stretch or twist the wiring harness wire.
Make sure that the connector O-ring is not broken or damaged. If damaged, replace the connector.
2.Install the connector until it clicks to be locked.
3.Hook the wiring harness wire to the projection on the valve body assembly to secure it.