DISASSEMBLY AND REASSEMBLY







Disassembly steps
<<A>>
>>B<<
1.
Ball bearing
<<A>>
>>A<<
2.
Ball bearing


3.
Input shaft

DISASSEMBLY SERVICE POINTS



<<A>> BALL BEARING REMOVAL



1.Set the special tool Bearing Remover (MD998917) as shown.
2.Set the special tool Bearing Remover (MD998917) on the end of one ball bearing. Use a hydraulic press to press out the bearing from the input shaft.
3.Turn the input shaft over. Set the special tool Bearing Remover (MD998917) on the end of the other ball bearing. Use a hydraulic press to press out the bearing from the input shaft.

REASSEMBLY SERVICE POINTS



>>A<< BALL BEARING INSTALLATION



Use the following special tools and the press to install the ball bearing to the input shaft.

  • Installer cap(MD998812)
  • Installer (100) (MD998813)
  • Installer adapter (MD998820)

>>B<< BALL BEARING INSTALLATION



Use the following special tools and the press to install the ball bearing to the input shaft.

  • Installer cap (MD998812)
  • Installer (100) (MD998813)
  • Installer adapter (MD998818)