REMOVAL AND INSTALLATION
<PHEV (RHD)>



MASTER CYLINDER AND BRAKE BOOSTER


The following items should be added as pre-removal and post-installation operations.
Note that the other service procedures are the same as for the standard models.


VACUUM HOSE AND VACUUM PIPE






Removal steps

>>A<<
1.
Vacuum hose C


2.
Hose clip

>>A<<
3.
Vacuum pipe assembly B


4.
Hose clip

>>A<<
5.
Vacuum hose D


·
Vacuum hose E, Vacuum tank (Refer to .)


6.
Hose clip
<<A>>
>>A<<
7.
Vacuum hose E

REMOVAL SERVICE POINT



<<A>> VACUUM HOSE E REMOVAL


Refer to .

INSTALLATION SERVICE POINTS



>>A<< VACUUM HOSE C, D, E AND VACUUM PIPE ASSEMBLY B INSTALLATION





To connect the vacuum hoses and the vacuum pipe assembly, observe the following procedures.
View A
  • Refer to .
View B, D, E
  • Align the marks to insert the vacuum hoses and the vacuum pipe assembly into the respective fittings. Then secure the hose clips as shown.
View C
  • Refer to .