DISASSEMBLY AND REASSEMBLY







Disassembly steps

>>A<<
1.
Bracket

>>A<<
2.
Body


3.
Steering lock dummy bracket assembly


4.
Steering column shaft assembly
note
  • The steering lock dummy bracket assembly (including a bracket, a housing and a flange bolt) is installed to secure the energy regeneration level selector (lever type). (The PHEV models do not have the steering lock function)
  • The steering lock dummy bracket is supplied not only as an assembly but also individually (the bracket, the housing and the flange bolt).
  • When it is supplied as an assembly, the housing and the bracket have been assembled by the flange bolt.

REASSEMBLY SERVICE POINT



>>A<< BODY/BRACKET INSTALLATION



1.Insert the housing from the column shaft end, and then engage the protrusion on the housing with the recess on the steering column shaft assembly.
2.Tighten the flange bolt to the specified torque.
Tightening torque: 12 ± 5 N·m