CHECK ON TRACTION BATTERY CAPACITY


note Measuring the drive battery capacity enables the check on the drive battery capacity (Refer to ).
note This procedure is to check the drive battery capacity on the vehicle. This is not to judge whether the traction battery is good or not. The energy level of the drive battery gradually decreases with the elapse of time and depending on the operating conditions.

1.After power supply mode of electric motor switch is OFF, connect the M.U.T.-III to the diagnosis connector.
2.Without depressing the brake pedal, operate the electric motor switch to turn ON the power supply mode of the power switch.
3.From the System Selection Screen of the M.U.T.-III, select the "BMU".
4.Select the "Data List" from the BMU Screen.
5.Check the BMU data list, item No. 18: Battery current capacity.
6.Turn the power supply mode of electric motor switch is OFF, and disconnect the M.U.T.-III.